Mold Killer – Kills Mold in 10 minutes FLAT
MoldSTAT Step 2 (Formerly Plus) : Mold Killer
Killing Mold without Bleach
- No Chlorine bleach in MoldSTAT
- For use both indoors & outdoors
- Fungicidal – mildew, fungus and black mold removal
- EPA Mold Remediation Registered Fungicide Black Mold Killer
- Concentrated: 3/4 ounce makes 1 gallon solution
- Removes Aspergillus Niger (black mold removal) and any color Mold.
Specially formulated MoldSTAT mold killer
Use MoldSTAT to kill mold on wood with confidence. MoldSTAT can be used on a variety of surfaces including finished and unfinished wood, drywall, concrete, brick, stucco, plastic, metals (including air ducts & coils) and carpets.
- Effectively kill mold without using Chlorine bleach
- Moldstat: highly effective for Fire or other water damage, sewer backup and mold removal after flood
Mold Prevention Spray Kit
Clean, Kill &Protect
One Low Price, Free Shipping
Effective Household Mold Management
Killing mold which means it has been laboratory tested to actually Kill Mold and Mildew.
MoldStat STEP 2 disinfect and stunt the growth of mold and mildew, leaving bathrooms and kitchens clean and fresh smelling.
Cleaning mold with MoldStat utilizes a specially formulated mold cleaner that effectively eliminates offensive mold odors caused by mold and mildew.
- Great mold remover for the kitchen, bathroom, basement, crawl space and other household areas
- Add to air conditioner condensate pump keeps drain lines flowing and mold free
- In addition to cleaning mold, MoldSTAT Step 2 is effective against bacteria and algae and even Corona Viruses
- MoldSTAT is even effective at controlling mold and mildew on shower curtains
MoldSTAT, EPA mold removal solution for Attic, basements, crawl spaces as well as School, Institutional, Industrial, and Nursing Homes.
MoldSTAT is also used by tomato growers to prevent mold, as well as Lumber yards, to stop growth of algae on yard lumber. Add MoldSTAT to your mold remediation arsenal.
MoldSTAT Mold Cleaner & Killer : Easy to use & cost effective
Moldstat is a color safe, effective treatment to eliminate mold on drywall, lumber, framing and joists, in crawlspaces, attics and other commonly moist and damp locations. Use with confidence on water tolerant fabrics and surfaces.
EPA Registered MoldSTAT Mold Cleaner
EPA Approved mold cleaner like MoldSTAT can make public health claims such as “disinfection” , “Fungicide” , or “Kills Mold”.
Products that only mention “Cleans Mold” have not been EPA registered and have no proof that the mold is actually Killed. Always confirm and mold removal product has an EPA Registration.
MoldStat : makes mold cleaning and removal mess free, and easy!!
Mold Cleaner BLEACH MYTH
Why?
Mold hyphae (root structures) actually grow into wood and drywall like roots. Bleach does not kill mold hyphae because bleach’s ion structure prevents chlorine from penetrating into many materials such as dry wall and wood. It stays on the outside surface, whereas mold has protected enzyme roots growing inside many construction materials.
When you spray surface mold using bleach as a mold cleaner, the water part of the solution soaks into the wood while the bleach chemical sits atop the surface, gasses off, and thus only will only partially kill surface mold while the water penetration into the building materials fosters further mold growth.
Chlorine Bleach is not color safe.
Chlorine Bleach is NOT a registered EPA mold killing product.
You can verify it yourself when you are unable to find an
EPA registration number to kill mold on the label of any brand of chlorine bleach.
Why not? Because it is not a mold cleaner or mold killer like other EPA approved chemicals.
EPA Mold Removal Information
Mold Cleaner Moldstat Step 2 is an EPA Registered disinfectant
MoldSTAT Step 2 for germs and household bacteria!
Concentrated MoldSTAT Step 2 is ideal for mold removal after flood waters have receded. Typical flood water contains elements of sewage full of germs and micro organisms. The advantage of Moldstat Plus is it’s bactericidal properties. In other words, it kills germs and bacteria. Testing was conducted according to the
AOAC Use Dilution Test method modified in the prescence of 5% Organic Serum against: MRSA, Staph, E-Coli, Strep, corona virus and 31 other dangerous bacteria.
Moldstat Step 2 – Germ Coverage List. This standardized testing shows that MoldSTAT Step 2 kills mold and the filth that floated in with flood waters.
MoldSTAT Step 2 Mold Killing – Coverage:
Every 32oz bottle of MOLDSTAT Step 2 makes 42 gallons of product (approx 4000 sq ft coverage).
Remember, when cleaning Floor Joists, double the square footage to include cleaning both sides of the joists
What can I apply MoldStat Step 2 with?
- Cold Foggers & Airless Sprayers:
The easy, electric way to fog mold cleaner . MoldSTAT Mold Cleaner is cold fogger compatible. Using a electric mold fogger is the best approach to mold cleaner application when penetrating into tight spaces is required. Airless paint sprayers also work. ( Ideal for HVAC / air duct mold removal ) - Pump Sprayer:
A pressurized or pump sprayer is useful to apply a more coarse spray. For removing low volumes of mold we recommend a hand held sprayer or for larger applications a multi Gallon Pump Up Sprayer - Bucket and Sponge:
In some cases a simple bucket and sponge or rag approach will work.
MoldSTAT plus Mold Cleaner Customer Reviews
What do our customers say about
Mold Cleaner?
( Read Additional Mold Removal Product Reviews )
Sarah & Family –
My family lives on the gulf coast Alabama, and humidity is a way of life here. Unfortunately that means mold grows as fast as the kids do.
For years my husband used bleach to get rid of the mold, but it would just come right back. Our neighbor phil, told us that he used a mold remover product called MoldSTAT to kill the root of the mold spores.
Trusting Phil, we ordered MoldSTAT, and applied it, and the mold vanished. Its been 3 months and the mold hasn’t returned!!
We love MoldSTAT, and all our neighbors are using it now.
Christian and Joanne –
My crawl space had no vents and there was an area where water had leaked and mold grew.
I used the fogmaster mold fogger with MOLDSTAT PLUS mold killer (EPA registered) and I could tell the very next day that it worked wonders killing the mold.
I know I saved thousands by researching killing mold and using the mold cleaner myself!
Thanks for helping our family, Christian and Joanne
Danny –
After spraying the affected mold area, does the spray/mold need to be wiped off?
Resident Guru –
No, it is not necessary to wipe the area for MoldSTAT to be effective. You may want to wipe the area to remove the dead mold and improve the cosmetic appearance
Isirio Abelon –
Mold Stat plus. Is it flammable. Can I apply (spray) directly into the Air handler return to distribute throughout the vents without affecting the air handler fan motor or other components.
Resident Guru –
MoldSTAT Plus is non-flammable ( and if also diluted with 170:1 with water ), it can be used to within duct work with out issue.
Robert johnsey –
I am doing a mold removal process in my crawlspace. I have had companies come out and told me it is not that bad. What I would like to know is when I use Moldstatplus, should I still use a hepatitis vacuum cleaner or does spraying down with your product kills the bacteria
Resident Guru –
MoldSTAT Plus will also kill the bacteria.
Here is the entire list:
https://cleanertoday.com/MOLDSTAT-Kills-s/136.htm
FXG L –
Can this product be used on mold that has permeated 1″ thick rough cut lumber? After cleaning with sodium percarbonate, neutralizing and washing, then fogging/spraying with moldstat plus can I then paint over without rewashing the wood?
Resident Guru –
MoldSTAT Plus can follow the course of water into wood..
Once applied it does not need to be rinsed before painting.
Suzy Parker –
If drywall or wood flooring has been wetted by leaking roof and mold/mildew grew, does drywall or hardwood need to be removed or will the fogging mist penetrate into the sheet rock and into the space between the two walls of sheetrock to destroy any mold in there??
Resident Guru –
Typically the seeping water over weeks and months can not be replicated by a 5 minute misting of the area.
removal of the mold / mildew infested material and fogging of the space behind it would be the gold standard for remediation.